CNC Honing machine HR 25
The CNC honing machine HR25 is designed for flat-top honing of cylinder blocks for internal combustion engines.
The machine's table moves along the X and Y axes, freeing the operator from the need to reposition the cylinder block during the honing process. The Z-axis drive is equipped with a servo motor, allowing for high precision movement and preventing the honing head from colliding with the cylinder block at the lowest point. This feature is particularly relevant for Subaru engines.
The machine comes standard with a collision protection system. Before starting the honing process, the machine checks the cylinder for obstructions. If any are detected, the machine alerts the operator.
The expansion (radial feed) of the honing stones is carried out automatically during the honing process, so the operator does not need to manually adjust the stones. The amount of stone expansion is programmed through the CNC system, eliminating the need to "catch" the dimensions of the cylinders.
The automatic cylinder shape correction system allows for automatic honing to achieve the required cylinder geometry. The expansion cone (radial feed) of the honing head has a reverse direction, which solves the problem of cone formation at the bottom of the cylinder.
The load control system enables the implementation of flat-top honing principles. By adjusting the required load and processing parameters, it is possible to manage the surface profile and change the ratio of pit area to flat surface area.
The coolant system features automatic activation. The coolant circulation system includes a cascade of two filters to ensure a high degree of purification.
The Hontronik ACNC v2.0 CNC system, developed in-house, allows for flexible management of the technological process and adaptation to customer requirements.
We have developed software for automatic control of the technological process for the CNC system.
CONTACT US
IN ANY WAY CONVENIENT FOR YOU
OUR CONTACTS
+ 381 62 116 15 41

CNC honing machine